Mesin Pemotong Mati Laser

Apa itu Mesin Pemotong Laser?

Mesin pemotong laser adalah peralatan pembuatan cetakan berpresisi tinggi yang menggunakan sinar laser untuk mengolah papan cetakan kayu.

Pada masa-masa awal, pola digambar pada papan cetakan menggunakan pensil atau pulpen, lalu dipotong secara manual dengan mesin gergaji ukir. Namun, seiring meningkatnya permintaan pasar terhadap papan cetakan secara pesat dan semakin pentingnya presisi yang lebih tinggi, metode pemotongan tradisional ini tidak lagi mampu memenuhi persyaratan industri.

At this time, laser cutting machines were introduced into the die-making industry. So many die makers called this equipment as the Mesin Pemotong Mati Laser.

Mengapa Menggunakan Mesin Pemotong Laser?

Desain Papan Cetakan yang Mudah

Papan sirkuit dirancang langsung di komputer—tidak perlu menggambar secara manual.

Presisi Tinggi

Desain dibuat menggunakan AutoCAD atau CorelDRAW dan disimpan dalam format DXF atau PLT. Setelah file diimpor ke perangkat lunak pemotongan laser Aolang dan parameter-parameternya diatur, mesin akan beroperasi secara otomatis. Seluruh proses pemotongan dikendalikan secara presisi oleh sistem tanpa campur tangan manual, sehingga akurasi pemotongan dapat mencapai ±0.05 mm.

Efisiensi Tinggi

The machine processes the entire board at one time and can operate continuously for 24 hours, which significantly improves production efficiency for die-making factories and helps increase overall economic benefits.

Contoh Pemotongan Laser

Papan Cetakan Kotak

Papan Cetakan Karton

Papan Cetak Label

Puzzle Die Board

Laser Marking Die Board

Pulse Cutting Die Board

Different Types of Laser Die Cutting Machine

Mesin Pemotong Mati Laser Tipe Gantry

Model: AL-GT600-1325

Laser Path: constant optical path

Power Option: 400W, 600W, 800W

Area Pemotongan: 1300 mm × 2500 mm

Mesin Pemotong Mati Laser Meja Silang

Model: AL-CT600-1325

Laser Path: fixed optical path

Power Option: 400W, 600W, 800W

Cutting Area: 1200mm*1800mm

Mesin Pemotong Mati Laser Daya Tinggi

Model: AL-GT1500-1325

Jalur Laser: jalur optik yang bergerak

Power Option: 1500W, 2000W, 2500W

Area Pemotongan: 1300 mm × 2500 mm

Mesin Pemotong Mati Laser PVC

Model: AL-ST150-0906

Jalur Laser: jalur optik yang bergerak

Pilihan Daya: 150 W, 300 W

Cutting Area: 900mm*600mm

Bagaimana Cara Mengoperasikan Mesin Pemotong Laser?

1.Turn on the air compressor and dryer.

2.Turn on the water chiller.

3. Press three buttons below.

4. Click Aolang laser cutting software and import your design.

5. Modify parameters like cutting sequence and knife seam.

6. Press the ”Laser” button, and the machine starts cutting.

Bagaimana Cara Merawat Mesin Pemotong Laser?

1. Replacement Cycle

Replace purified water every 30 days.

2. Regular Cleaning

Dismantle the surrounding coverof the chiller every 15 days, and blow off internal dust with an air gun to maintain optimal cleanliness and ventilation.

3. Control of Ambient & Water Temperature

When ambient temperature ≥ 1°C, use purified water as cooling medium to guarantee stable heat dissipation performance.

When ambient temperature ≤ 0°C, replace purified water with CHIEF-25°C automotive windshield washer fluid. Filling volume per machine: 20L ~ 25L. Set water temperature to 10°C while keeping temperature difference at 5°C.

1. Focus Lens

Clean once before daily startup and once after lunch break every day.
Dip a cotton swab in industrial alcohol to wipe the lens gently to avoid scratching the mirror surface.

2. Reflective Mirror

Clean every 2 days to ensure clear and stable optical path transmission.

3. Laser Tube Output Mirror

Clean every 2 to 3 days (twice weekly approximately).
Inspect lens condition with a flashlight before cleaning.
Allow 3 to 5 minutes of volatilization after cleaning before restarting the machine, to prevent the output mirrordamage caused by residual alcohol.
Blow away dust with an air gun every 7 days to maintain efficient heat dissipation and prevent damage to the laser tube output lens caused by overheating.

4. Laser Copper Nozzle

Remove the copper nozzle upon daily work completion.
Soak the nozzle in clean water overnight.
Blow dry thoroughly with an air gun and reinstall before work the next morning.

1. Laser Power Supply

The laser power supplies aremounted beside the laser tube.
Blow dust off the power supplieswith an air gun every 15 days to avoid resistor burnout from overheating (burned resistors are non-repairable).

2. Drivers

Two drivers are installed inside the electrical cabinet under the operation console, accessible by opening the left side cover.

Every 3 months following steps below:

Press the Maintenancebutton on the operation panel.
The automatic oil pot starts lubrication with a preset runtime of 60 seconds.
Turn off the Maintenance button once the cycle finishes.

Regular lubrication effectively reduces mechanical abrasion and extends the service life of guide rails and ball screws.

Keep the equipment and working area dust-free and tidy.
Daily cleaning is recommended if conditions permit. If not feasible, blow dust off the work platform with an air gun and wipe debris with a clean rag every 3 to 7 days.