Máquina de corte e vinco a laser

O que é a máquina de corte a laser?

A máquina de corte a laser é um equipamento de alta precisão para a fabricação de matrizes que utiliza um feixe de laser para processar placas de madeira para matrizes.

No início, os desenhos eram traçados nas placas de corte com lápis ou canetas esferográficas e, em seguida, recortados manualmente com uma serra tico-tico. No entanto, à medida que a demanda do mercado por placas de corte aumentou rapidamente e uma maior precisão se tornou essencial, esse método tradicional de corte deixou de atender às exigências do setor.

At this time, laser cutting machines were introduced into the die-making industry. So many die makers called this equipment as the Máquina de corte e vinco a laser.

Por que usar a máquina de corte a laser?

Projeto simples de placa de corte

As placas de circuito são projetadas diretamente no computador — sem necessidade de desenho manual.

Alta precisão

O projeto é criado no AutoCAD ou no CorelDRAW e salvo nos formatos DXF ou PLT. Após importar o arquivo para o software de corte a laser Aolang e definir os parâmetros, a máquina opera automaticamente. Todo o processo de corte é controlado com precisão pelo sistema, sem intervenção manual, de modo que a precisão do corte pode atingir ±0.05 mm.

Alta eficiência

The machine processes the entire board at one time and can operate continuously for 24 hours, which significantly improves production efficiency for die-making factories and helps increase overall economic benefits.

Amostras de corte a laser

Placa de molde para caixas

Chapa de corte para caixas de papelão

Chapa de corte para etiquetas

Puzzle Die Board

Laser Marking Die Board

Pulse Cutting Die Board

Different Types of Laser Die Cutting Machine

Máquina de corte e vinco a laser tipo pórtico

Model: AL-GT600-1325

Laser Path: constant optical path

Power Option: 400W, 600W, 800W

Área de corte: 1.300 mm × 2.500 mm

Máquina de corte e vinco a laser de mesa cruzada

Model: AL-CT600-1325

Laser Path: fixed optical path

Power Option: 400W, 600W, 800W

Cutting Area: 1200mm*1800mm

Máquina de corte e vinco a laser de alta potência

Model: AL-GT1500-1325

Trajetória do laser: trajetória óptica em movimento

Power Option: 1500W, 2000W, 2500W

Área de corte: 1.300 mm × 2.500 mm

Máquina de corte e vinco a laser para PVC

Model: AL-ST150-0906

Trajetória do laser: trajetória óptica em movimento

Opção de potência: 150 W, 300 W

Cutting Area: 900mm*600mm

Como operar a máquina de corte a laser?

1.Turn on the air compressor and dryer.

2.Turn on the water chiller.

3. Press three buttons below.

4. Click Aolang laser cutting software and import your design.

5. Modify parameters like cutting sequence and knife seam.

6. Press the ”Laser” button, and the machine starts cutting.

Como fazer a manutenção da máquina de corte a laser?

1. Replacement Cycle

Replace purified water every 30 days.

2. Regular Cleaning

Dismantle the surrounding coverof the chiller every 15 days, and blow off internal dust with an air gun to maintain optimal cleanliness and ventilation.

3. Control of Ambient & Water Temperature

When ambient temperature ≥ 1°C, use purified water as cooling medium to guarantee stable heat dissipation performance.

When ambient temperature ≤ 0°C, replace purified water with CHIEF-25°C automotive windshield washer fluid. Filling volume per machine: 20L ~ 25L. Set water temperature to 10°C while keeping temperature difference at 5°C.

1. Focus Lens

Clean once before daily startup and once after lunch break every day.
Dip a cotton swab in industrial alcohol to wipe the lens gently to avoid scratching the mirror surface.

2. Reflective Mirror

Clean every 2 days to ensure clear and stable optical path transmission.

3. Laser Tube Output Mirror

Clean every 2 to 3 days (twice weekly approximately).
Inspect lens condition with a flashlight before cleaning.
Allow 3 to 5 minutes of volatilization after cleaning before restarting the machine, to prevent the output mirrordamage caused by residual alcohol.
Blow away dust with an air gun every 7 days to maintain efficient heat dissipation and prevent damage to the laser tube output lens caused by overheating.

4. Laser Copper Nozzle

Remove the copper nozzle upon daily work completion.
Soak the nozzle in clean water overnight.
Blow dry thoroughly with an air gun and reinstall before work the next morning.

1. Laser Power Supply

The laser power supplies aremounted beside the laser tube.
Blow dust off the power supplieswith an air gun every 15 days to avoid resistor burnout from overheating (burned resistors are non-repairable).

2. Drivers

Two drivers are installed inside the electrical cabinet under the operation console, accessible by opening the left side cover.

Every 3 months following steps below:

Press the Maintenancebutton on the operation panel.
The automatic oil pot starts lubrication with a preset runtime of 60 seconds.
Turn off the Maintenance button once the cycle finishes.

Regular lubrication effectively reduces mechanical abrasion and extends the service life of guide rails and ball screws.

Keep the equipment and working area dust-free and tidy.
Daily cleaning is recommended if conditions permit. If not feasible, blow dust off the work platform with an air gun and wipe debris with a clean rag every 3 to 7 days.